A mask or protective covering for the face or part of the face downhill skiers wearing neoprene face masks and goggles: such as medical(1): a covering (as of polypropylene fiber or cotton fabric) for the mouth and nose that is worn especially to reduce the spread of infectious agents (such as viruses or bacteria).
Cloth face mask
Cloth face mask
A cloth face mask made out of 2-ply construction with layers of 85% polyester and 15% cotton fabric
A cloth face mask is a mask made of common textiles, usually cotton, worn over the mouth and nose. When more effective masks are not available, and when physical distancing is impossible, cloth face masks are recommended by public health agencies for disease “source control” in epidemic situations to protect others from virus laden droplets in infected mask wearers’ breath, coughs, and sneezes. Because they are less effective than N95 masks, surgical masks, or physical distancing in protecting the wearer against viruses, they are not considered to be personal protective equipment by public health agencies. They are used by the general public in household and community settings as protection against both infectious diseases and particulateair pollution.
Cloth face masks were routinely used by healthcare workers starting from the late 19th century until the mid 20th century. In the 1960s they fell out of use in the developed world in favor of modern surgical masks.
Face Masks are classified into civilian masks and medical(Surgical) masks. A civilian mask is used for the purpose of filter air into the mouth and nose to prevent harmful gases, odors, and droplets from entering and leaving the wearer’s mouth and nose. Civilian(Non Surgical) masks mainly divided into cotton mask, non-woven mask, polymer material mask, activated carbon powder filter mask, activated carbon fiber felt pad mask. Medical masks can prevent most of the bacteria, viruses and other pathogens, and WHO recommends that medical personnel use protective masks (N-95 masks) against particles to prevent virus infection in the hospital air. Medical masks mainly divided into medical protective masks, medical surgical masks, general medical masks.
There are three commonly used masks on the market: cotton masks, medical surgical masks and medical protective masks (N-95 masks), among which medical surgical masks can block 70% of bacteria, N-95 masks can block 95% of bacteria, and cotton masks can block only 36% of bacteria.
Take dimensions, and report actual finding. Values in cm.
Compare to client specifications and perfect sample if applicable.
Inner packing barcode scan
Scan barcode
Compare result with actual printed number and specification from client if applicable.
Inner packing sticker
Check inner packing stickers
Confoms to specifications
Instruction manual
Check instruction manuals
Compare to client specification if applicable.
Inner packing polybag
Look at a polybag details
Report actual findings and tick the boxes below. Findings must conform to client specifications.
Inner packing information
Look at a carton details.
Report actual findings and tick the boxes below. Findings must conform to client specifications.
Appearance & workmanship
Report actual finding and take detailed photos.
Confoms to specifications
Dimension
Take dimensions
Report actual finding and compare to client specification if applicable. Values in cm.
Weight
Take weight
Report actual finding and compare to client specification if applicable. Values in g.
Certification
Check with factory for applicable certifications.
Report actual findings
Color check
Check unit colors according to client’s file
Confoms to specifications
Material check
Check product material according to client’s file
Confoms to specifications
Smell check
Open the master carton, inner box, and product.
No strong or irritative smell should be found
Printing check
Printing on masks is correct, good quality
Confoms to specifications
Fabric straps
Fabric straps are fixed on the mask, not loose. Strap ends are neatly trimmed.
Confoms to specifications
Function test
Check the function of the product, it should work as claimed
Confoms to specifications
Fitting test
Put product on a dummy or a live model.
Product should look good (no obvious fitting problem)
Waterproof test
Drop water on the product surface.
It should be waterproof
Fatigue test
Push/press/use adjustable parts 50 times.
The products should be as remain the same as new.
Color fastness to rubbing test
Rub the markings and the logo 20 times, with a soft cloth dipped in alcohol (if no alcohol is available, use oxygen water and mention it in the findings).
